MTH C41 • C51 • C61 Series Pumps
Close-coupled centrifugal pumps from MTH provide economical performance for 5 to 100 GPM applications requiring heads to 140 feet. By combining the latest concepts in pump design with precision manufacturing, the C Series pumps deliver excellent efficiency and low NPSH requirements. Efficient manufacturing processes and highly optimized mechanical designs control costs. Maintenance costs are kept to a minimum by combining a highly serviceable design with quality components to provide a long service life.
Capacities to 105 GPM
Heads to 153 Feet
Horizontal Close Coupled
C Series semi-open impellers allow the pump to pass small solids and fibrous material while close running tolerances maintain efficiency and performance. Impellers are pre-trimmed to be non-overloading to the pump and motor size indicated.
C Series centrifugal pumps meet low net positive suction head requirements (NPSHR) without sacrificing efficiency. This is achieved by low fluid inlet velocity and gentle acceleration to peripheral velocities.
Mechanical Seal Box
The large seal chamber provides a wide fluid passage area for maximum cooling of the seal faces and allows debris and gases to be flushed away.
Axial Balance System
The C Series pumps utilize a thrust balancing system which combines the advantages of both static and dynamic balancing techniques to reduce axial thrust and provide longer bearing life.
Similar to the T31 Series, the C Series takes advantage of our custom manufactured dual face D3 motors that incorporate a 304 stainless steel shaft and heavy-duty bearing. The stainless steel shaft eliminates the necessity of a shaft sleeve, thereby reducing the parts count and simplifying maintenance and servicing procedures. All D3 motors also feature a two-pole 50/60Hz rating, as well as CE Mark approval useful for OEM’s with worldwide customers. The three-phase versions of the D3 motors feature a compact TEFC enclosure and a range from 1/3 to 3HP. The single phase D3 motors have an ODP enclosure and a range from 1/3 to 2HP.
C Series pump casings are axially adjustable allowing the use of custom impellers for OEM applications and to allow restoration of performance by closing up the internal clearances that develop over the course of a unit’s extended service life.
|Quick Selection Guide|
|4" Pump||1/3 HP||1/2 HP||3/4 HP||1 HP||1 ½ HP||2 HP||3 HP|
|1/2 X 3/4 X 4||C41AB||C41AB||-||-||-||-||-|
|3/4 X 1 X 4||C41BC||C41BC||-||-||-||-||-|
|1 X 1 ¼ X 4||C41CD||C41CD||C41CD||-||-||-||-|
|1 ¼ X 1 ½ X 4||-||C41DE||C41DE||C41DE||-||-||-|
|1 ½ X 2 X 4||-||-||C41EF||C41EF||C41EF||-||-|
|5" Pump||1/3 HP||1/2 HP||3/4 HP||1 HP||1 ½ HP||2 HP||3 HP|
|1/2 X 3/4 X 5||-||C51AB||C51AB||C51AB||-||-||-|
|3/4 X 1 X 5||-||-||-||C51BC||C51BC||-||-|
|1 X 1 ¼ X 5||-||-||-||C51CD||C51CD||C51CD||-|
|1 ¼ X 1 ½ X 5||C51DE||C51DE||-|
|6" Pump||1/3 HP||1/2 HP||3/4 HP||1 HP||1 ½ HP||2 HP||3 HP|
|1/2 X 3/4 X 6||-||-||-||-||C61AB||-||-|
|3/4 X 1 X 6||-||-||-||-||C61BC||C61BC||C61BC|
|1 X 1 ¼ X 6||-||-||-||-||-||-||C61CD|